The most common ailments in washing machines

In these times, who does not know about the washing machine? According to specialists in our technical service and one of the most indispensable appliances inside the house, we use it to wash our laundry. This artifact allows us to save water and time, which makes the entire washing process easier.

But… As well as other machines for domestic use, the washing machines are not free to suffer deterioration or damage, there are even some malfunctions that are very common in this type of artifact. Do you want to know them? Keep reading that in this post we have gathered the most common.

fall in the program

A fall in the washing machine program is mainly due to the addition of too much detergent to the household appliance, causing a variation in the air pressure, which finally causes the system to move forward.

does not rotate

This problem can be caused by multiple factors. It is possible that the washer port is not closing properly, the gum of the port has been loosened or the pulley strap is present, preventing the engine from turning.

Disadvantages with the Prestostat

According to our technical service team, the presertation is a part that is responsible for cutting the water level in the household appliance, and then detecting the necessary water level. So when this component is more probable it is that the liquid step in the drum has been converted into a foam ball.

From downloading to touching it

In these cases, there is a possibility that the washing machine does not take land. To repair this problem, it is best to go to a professional technical assistance service.

The drum emits a lot of noise or rotates irregularly

When the drum produces excessive noise, it rotates irregularly and only because the belt is yielded or loose. This generates inconveniences in the centrifuge.

Exceeding the water deficiency

This type of malfunction is closely related to a fall in the thermostat. The most probable is that the subject is not found in the correct way, so it is necessary to place and seal properly so that the screws that support them do not loosen.

Does not expel the dirty water

If your washer is not expelling the waste water, it is because the circulator quotes have obstructions, the drain motor is broken.